ZyXEL Confidential
340QR5C1.doc
15/38
help as well.
2. [BUG FIX]
Symptom: In Web GUI, chose French or German language, and the any IP can’t be
displayed in logs setting page.
3. [BUG FIX]
Symptom: Configure more than 5 entries in VC hunt table, Restart device. VC auto
hunt will start. Start the IE, and will see the "Wait..." information. Wait a moment, the
IE will show "hunt successfully page"(error) Restart IE, page will show PPPoE
need username and password page. Enter the user name and password and click
"Apply". IE will re-display the setup page for username and password. SMT shows
“dial fail, no interface available”
Condition: N/A
Solution: After hunting is successful, system should see the hunted encapsulation but
not the ISP remote node’s encapsulation for further reference.
4. [FEATURE ENHANCE]
Symptom: VC auto-hunting doesn’t support static IP address, if ISP provides static IP
address, system hunting will fail and browser will get fail page
Condition: N/A
Solution:
1. In Web GUI, add a hyperlink in failed page of Zero-Configuration that’s to prompt
user to login Web Configurator if they have static IP address from ISP
2. In Web GUI Wizard, if the configuration is saved with static IP address, then system
will turn off Zero-Configuration (VC auto-hunting) automatically, and if dynamic IP
address is chose then system will turn on Zero-Configuration as well
3. In Web GUI, WAN setting page, add an item for Zero-Configuration to turn on/off.
4. In SMT4, SMT11, if user saves remote node as static IP address, system will turn off
Zero-Configuration, and vice versa.
Modifications in V 3.40(QR.0)b5 | 05/3/2004
1. [BUG FIX]
Symptom: When change to France or German, the string of media bandwidth
management display is EMPTY on Web GUI
Condition: N/A
2. [FEATURE ENHANCE]
Symptom: In Zero-Configuration, when DSL is down, user click home page will get
Web redirect to fail page, and after connection is up, click home page again will not
work, but open another IE is OK
Condition: N/A
Solution: Add a close button in successful page, this IE will be closed automatically.
3. [BUG FIX]
Symptom: Throughput is only 12M with G100
Condition: Bandwidth management will impact WLAN throughput even bandwidth
management is not active.
4. [BUG FIX]
