ZyXEL Confidential
340QR5C1.doc
34/38
sys bridge [on|off]
Set system bridge on/off
Menu 1
sys routeip [on|off]
Set system IP routing on/off
Menu 1
sys hostname [hostname]
Set system name
Menu 1
sys display
Display hostname, routing/bridge mode information in menu
1
Display Menu 1
sys default
Load All Default Settings Except LAN and DHCP.
sys save
Save all the parameters which will include menu1, menu 3.2
LAN, menu 4 or menu 11 WAN, menu 12 static route, menu
15 NAT server set, menu 21 filter sets, menu 22 SNMP,
menu 24.11 remote management and 3.5 Wireless LAN
wan backup mechanism [dsl | icmp]
Set wan backup mechanism to DSL link or ICMP
Menu 2
wan backup addr [index] [IP addr]
Set wan ip address <index>
Menu 2
wan backup tolerance [number]
Set keepalive fail tolerance
Menu 2
wan backup recovery [interval(sec)]
Set recovery interval
Menu 2
wan backup timeout [number]
Set ICMP timeout
Menu 2
wan backup save
Save wan backup related parameters
Menu 2
wan backup display
Display wan backup configurations
Menu 2
wan tredir active [on|off]
Set traffic redirect on/off
Menu 2.1
wan tredir ip [IP addr]
Set traffic redirect gateway IP address
Menu 2.1
wan tredir metric [number]
Set traffic redirect metric
Menu 2.1
wan tredir save
Save traffic redirect related parameters
** Have to apply “wan backup save” command thereafter
Menu 2.1
wan tredir display
Display traffic redirect configurations
Menu 2.1
lan index [1|2|3|4]
1: Select main LAN Interface
2: Select IP Alias 1
3: Select IP Alias 2
4.DMZ
Select a LAN interface to edit
Menu 3.2
lan active [on|off]
Turn on or off on IP Alias Interface
Menu 3.2.1
lan ipaddr [address] [subnet mask]
Set LAN IP address and subnet mask
Example:
> lan ipaddr 192.168.1.1 255.255.255.0
Menu 3.2
lan rip [none|in|out|both] [rip1|rip2b|rip2m]
Set LAN IP RIP mode and RIP version, if you choose none in
the first parameter, the second parameter is also necessary
Menu 3.2
lan multicast [none|igmpv1|igmpv2]
Set LAN IP multicast mode
Menu 3.2
lan filter [incoming|outgoing] [tcpip|generic]
[set#1] [set#2] [set#3] [set#4]
Set LAN filter to be incoming/outgoing or protocol /device
and the filter set could be 1-12, 0 means empty
Example:
Lan filter incoming tcpip 1 0 0 0
Menu 3.1
lan dhcp mode [server|relay|none]
Set DHCP mode to be”server”, “relay”, “none”
Menu 3.2
lan dhcp server dnsserver [pri dns] [sec dns] Set primary and secondary LAN DNS server
Menu 3.2
lan dhcp server pool [start-address] [num]
Set DHCP start address and pool size
Menu 3.2
lan dhcp server gateway [IP address]
Set DHCP gateway
Menu 3.2
lan dhcp server netmask [subnet mask]
Set DHCP subnet mask
Menu 3.2
lan dhcp server leasetime [second]
Set DHCP lease time
Menu 3.2
lan dhcp server renewaltime [second]
Set DHCP renew time
Menu 3.2
lan dhcp server rebindtime [second]
Set DHCP rebind time
Menu 3.2
lan dhcp relay server [IP address]
Set IP address of DHCP relay server
Menu 3.2
lan display
Display LAN or IP alias parameters
Display Menu 3
lan clear
Clear the Working Buffer
lan save
Save LAN related parameters
