ZyXEL Confidential
340QR5C1.doc
25/38
multimode
opmode
Show the operational mode
rateadap
[on|off]
Turn on/off rate adaptive mechanism
perfdata
Show performance information,CRC,FEC, error
seconds..
reset
Reset ADSL modem, and must reload the modem
code again
Status
ADSL status (ex: up, down or wait for init)
errorsecond
sendes
Send current error second information
immediately
targetnoise
[value]
Adjust target noise offset
wan atm
vchunt
Add
<remoteNodeIndex>
<vpi>
<vci>
<service bit(hex)>
Add a entry to hunting pool
<remote node> : input the remote node index 1-8
<vpi> : vpi value
<vci> : vci value
<service>: it’s a hex value, bit0:PPPoE/VC (1),
bit1:PPPoE/LLC (2) , bit2:PPPoA/VC (4),
bit3:PPPoA/LLC (8), bit4:Enet/VC (16),
bit5 :Enet/LLC (32)
For examples:
If you need service PPPoE/LLC and Enet/LLC
then the service bits will be 2+32 = 34 (decimal)
= 22 (hex), you must input 22
Need to perform save after this command
Remove <removeNodeId> <vpi> <vci>
Input remote node ID and vpi, vci value to
remove the specific entry. System will save
automatically.
Active <yes|no>
Enable VC auto hunting featurer
display
Display the hunt pool
Clear
Clear the configure buffer
Save
Save current setting into ROM file
timer
The waiting time before checking the hunting
table result
Send
Send VC hunt pattern again
result
Check the result of VC auto hunting
hwsar
disp
Display hwsar packets incoming/outgoing
information
clear
Clear hwsar packets information
WLAN
Related
Command
Home
Command
Description
Wlan
active
[on|off]
[0|1]
Turn on/off wireless lan
association
Show association list
load
Load WLAN configuration into buffer.
Display
Display WLAN configuration data.
chid
Configure channel ID
essid
Configure
ESSID
hiddenssid
[on/off]
Enable/Disable
hidden
SSID
