P-660R-Tx v2 Series Support Notes
You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2
ain LAN
cpip|generic> [set#]
onfigured
et to save the configuration.
•
IP Alias Setup
(1) Telnet to access the
CLI
of the P-660R-Tx v2, select an IP Alias interface to
ber]
Alias#1
go through the P-660R-Tx v2 by command in
CLI
:
lan index [index number]
Usage: index number = 1 m
2 IP Alias#1
3 IP Alias#2
lan filter <incoming|outgoing> <t
Usage: set#= the corresponding filter set number you’ve c
lan save
Don’t forg
begin via command:
lan index [index num
Usage: index number = 2 IP
3 IP Alias#2
(2) Active this IP Alias Interface via command:
lan active yes
52
All contents copyright © 2006 ZyXEL Communications Corporation.
