P-660R-Tx v2 Series Support Notes
3. P-660R-Tx v2 router setup
•
Before making a VPN connection from Win9x to WinNT server, you
need to connect P-660R-Tx v2 router to your ISP first.
•
Enter the IP address of the PPTP server (WinNT server) and the
port number for PPTP as shown below.
When you have finished the above settings, you can ping to the remote Win9x
client from WinNT. This ping command is used to demonstrate that remote
the Win9x can be reached across the Internet. If the Internet connection
between two LANs is achievable, you can place a VPN call from the remote
Win9x client.
For example: C:\ping 203.66.113.2
When a dial-up connection to ISP is established, a default gateway is assigned
to the router traffic through that connection. Therefore, the output below shows
the default gateway of the Win9x client after the dial-up connection has been
established.
Before making a VPN connection from the Win9x client to the NT server, you
need to know the exact Internet IP address that the ISP assigns to P-660R-Tx
30
All contents copyright © 2006 ZyXEL Communications Corporation.
