P-660R-Tx v2 Series Support Notes
(1) Configure P-660R-Tx v2 as routing mode in
Winzard Setup -> ISP
Parameters for Internet Access.
(2) Configure a LAN IP for the P-660R-Tx v2 and the DHCP settings in
Advanced Setup -> LAN -> LAN Setup
.
(3) Configure for Internet setup parameters in
Advanced Setup -> WAN ->
WAN Setup.
Key Settings:
Option
Description
Encapsulation
Select the correct Encapsulation type that your ISP supports. For
example, RFC 1483.
Multiplexing
Select the correct Multiplexing type that your ISP supports. For
example, LLC.
VPI & VCI
number
Specify a VPI (Virtual Path Identifier) and a VCI (Virtual Channel
Identifier) given to you by your ISP.
Network Address
Translation
Set to
SUA Only
if you only have a single IP account for sharing with
local computers.
IP Address
Assignment
Set to
Dynamic
if the ISP provides the IP for the P-660R-Tx v2
dynamically. Otherwise, set to
Static
and enter the IP in the following
IP Address
field.
IP Address
This field can not be configured if the ISP provides the IP for the
P-660R-Tx v2 dynamically. Otherwise, enter the IP that the ISP gives
to you.
3. Setup the P-660R-Tx v2 as a DHCP Relay
•
What is DHCP Relay?
DHCP stands for Dynamic Host Configuration Protocol. In addition to the
DHCP server feature, the P-660R-Tx v2 supports the DHCP relay function.
When it is configured as DHCP server, it assigns the IP addresses to the LAN
clients. When it is configured as DHCP relay, it is responsible for forwarding
the requests and responses negotiating between the DHCP clients and the
server. See figure 1.
21
All contents copyright © 2006 ZyXEL Communications Corporation.
