P-660R-Tx v2 Series Support Notes
Setp 1:
Telnet to the P-660R-Tx v2. (We suppose the LAN IP Address of
P-660R-Tx v2 is 192.168.1.1)
Step 2:
Select one Address Mapping Set (#1~#8) by command ‘
ip nat
addrmap map [map #] [set name]
’ (set name is optional). Suppose we
configure set 2 in the example.
Setp 3:
Set NAT address mapping rule for the Address Mapping Set you just
configured (Set 2 in this example) by command ‘
ip nat addrmap rule [rule#]
[insert | edit] [type] [local start IP] [local end IP] [global start IP] [global
end IP] [server set #]
’. Suppose we set a Many-to-One rule for set 2 by
command ‘
ip nat addrmap rule 1 edit 1 192.168.1.10 192.168.1.20 172.1.1.1
172.1.1.1
’
Setp 4:
Save the configuration by command ‘
ip nat addrmap save
’. You can
apply the Address Mapping Set 2 to remote nodes in Web Configurator when
you select Full Feature NAT. See the intire process as follows:
Set 5:
You can lookup the successfully configured Address Mapping Sets by
command ‘
ip nat addrmap disp
’
Key Settings:
CI Command
Description
ip nat addrmap map [map#] [set
name]
Select NAT address mapping set and set mapping set
name, but set name is optional
Example:
> ip nat addrmap map 2 Test
ip nat addrmap rule [rule#] [insert |
edit] [type] [local start IP] [local end IP]
[global start IP] [global end IP] [server
set #]
Set NAT address mapping rule. If the “type” is not
“inside-server” then the “type” field will still need a
dummy value like “0”.
Type is 0 - 4 = one-to-one, many-to-one,
many-to-many-overload, many-to-many-non overload,
inside-server
Example:
> ip nat addrmap rule 1 edit 3 192.168.1.10
192.168.1.20 172.1.1.1 172.1.1.1
ip nat addrmap clear [map#] [rule#]
Clear the selected rule of the set
ip nat addrmap freememory
Discard Changes
36
All contents copyright © 2006 ZyXEL Communications Corporation.
