P-660R-Tx v2 Series Support Notes
The NAT Server Set is a list of LAN side servers mapped to external ports. We
can configure it in Web Configurator, Advanced Setup,
Network -> NAT ->
Port Forwarding.
To use the NAT server sets you’ve configured, a
Server
rule must be set up inside the NAT Address Mapping set. Please see NAT
Server Sets for further information on how to apply it.
When you select
SUA Only,
the P-660R-Tx v2 will use a default SUA Address
Mapping set for it. It has two rules:
Many-to-One
and
Server
. You can see it in
CLI
by command ‘
ip nat lookup 255
’:
Please note that the fields in this menu are read-only. However, the settings of
the rule set 2 can be modified in Web Configurator, Advanced Setup,
Network
-> NAT -> Port Forwarding.
The following table explains the fields in this
above screen:
Field
Description
Option/Example
set
This is sequence number for Address Mapping Sets 255 for SUA
Internal
Start IP
This is the starting local IP address (ILA).
0.0.0.0 for the
Many-to-One type.
Local End
IP
This is the starting local IP address (ILA). If the rule is
for all local IPs, then the Start IP is 0.0.0.0 and the
End IP is 255.255.255.255.
255.255.255.255
Global Start
IP
This is the starting global IP address (IGA). If you
have a dynamic IP, enter 0.0.0.0 as the Global Start
IP.
0.0.0.0
Global End
IP
This is the ending global IP address (IGA).
N/A
Type
This is the NAT mapping types.
Many-to-One and
Server
Here we’ll guide you to configure Address Mapping Sets from
Web
Configurator
and
CLI
. (Since in
Web Configurator
we can only edit the rules
33
All contents copyright © 2006 ZyXEL Communications Corporation.
