ZyXEL Communications P-320W v3 Скачать руководство пользователя страница 251 | Manualshive

Страница: 251 / 262

ZyXEL Communications P-320W v3 Скачать руководство пользователя страница 251

P-320W v3 User’s Guide

251

A

P P E N D I X

F

Legal Information

Copyright

Copyright © 2009 by ZyXEL Communications Corporation.

The contents of this publication may not be reproduced in any part or as a whole,
transcribed, stored in a retrieval system, translated into any language, or
transmitted in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, photocopying, manual, or otherwise, without the prior written
permission of ZyXEL Communications Corporation.

Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any
products, or software described herein. Neither does it convey any license under
its patent rights nor the patent rights of others. ZyXEL further reserves the right
to make changes in any products described herein without notice. This publication
is subject to change without notice.

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL
Communications, Inc. Other trademarks mentioned in this publication are used for
identification purposes only and may be properties of their respective owners.

Certifications

Federal Communications Commission (FCC) Interference Statement

The device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions:

• This device may not cause harmful interference.

«
...
249
250
251
252
253
...
»

Содержание P-320W v3







































































































































































































































































Отзывы:

Нет отзывов