ZyXEL Communications P-2608HWL-D1 Скачать руководство пользователя страница 408

Страница: 408 / 451

P-2608HWL-Dx Series User’s Guide

408

Appendix G Log Descriptions

ip spoofing - no routing
entry ICMP (type:%d,
code:%d)

The firewall classified an ICMP packet with no source routing entry

as an IP spoofing attack.

vulnerability ICMP
(type:%d, code:%d)

The firewall detected an ICMP vulnerability attack.

traceroute ICMP (type:%d,
code:%d)

The firewall detected an ICMP traceroute attack.

Table 171

802.1X Logs

LOG MESSAGE

DESCRIPTION

Local User Database accepts
user.

A user was authenticated by the local user database.

Local User Database reports user
credential error.

A user was not authenticated by the local user database

because of an incorrect user password.

Local User Database does not
find user`s credential.

A user was not authenticated by the local user database

because the user is not listed in the local user database.

RADIUS accepts user.

A user was authenticated by the RADIUS Server.

RADIUS rejects user. Pls check
RADIUS Server.

A user was not authenticated by the RADIUS Server.

Please check the RADIUS Server.

Local User Database does not
support authentication method.

The local user database only supports the EAP-MD5

method. A user tried to use another authentication

method and was not authenticated.

User logout because of session
timeout expired.

The router logged out a user whose session expired.

User logout because of user
deassociation.

The router logged out a user who ended the session.

User logout because of no
authentication response from
user.

The router logged out a user from which there was no

authentication response.

User logout because of idle
timeout expired.

The router logged out a user whose idle timeout period

expired.

User logout because of user
request.

A user logged out.

Local User Database does not
support authentication method.

A user tried to use an authentication method that the local

user database does not support (it only supports EAP-

MD5).

No response from RADIUS. Pls
check RADIUS Server.

There is no response message from the RADIUS server,

please check the RADIUS server.

Use Local User Database to
authenticate user.

The local user database is operating as the

authentication server.

Use RADIUS to authenticate user.

The RADIUS server is operating as the authentication

server.

Table 170

Attack Logs (continued)

LOG MESSAGE

DESCRIPTION

Содержание P-2608HWL-D1




































































































































































































































































































































































































































































Результаты поиска

Содержание P-2608HWL-D1

Отзывы:

Похожие инструкции для P-2608HWL-D1

Бренды по названию

Популярные бренды

ZyXEL Communications P-2608HWL-D1, Руководство пользователя

Результаты поиска

Содержание P-2608HWL-D1

Отзывы:

Похожие инструкции для P-2608HWL-D1

Бренды по названию

Популярные бренды