manualshive.com logo in svg

ZyXEL Communications P-2608HWL-D1, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications P-2608HWL-D1 Скачать руководство пользователя страница 109

P-2608HWL-Dx Series User’s Guide

Chapter 8 LAN Setup

109

8.2.3  Multicast

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 
recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to 
a group of hosts on the network - not everybody and not just 1. 

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish 
membership in a Multicast group - it is not used to carry user data. IGMP version 2 (RFC 
2236) is an improvement over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If 
you would like to read more detailed information about interoperability between IGMP 
version 2 and version 1, please see sections 4 and 5 of RFC 2236. The class D IP address is 
used to identify host groups and can be in the range 224.0.0.0 to 239.255.255.255. The address 
224.0.0.0 is not assigned to any group and is used by IP multicast computers. The address 
224.0.0.1 is used for query messages and is assigned to the permanent group of all IP hosts 
(including gateways). All hosts must join the 224.0.0.1 group in order to participate in IGMP. 
The address 224.0.0.2 is assigned to the multicast routers group. 

The ZyXEL Device supports both IGMP version 1 (

IGMP-v1

) and IGMP version 2 (

IGMP-

v2

). At start up, the ZyXEL Device queries all directly connected networks to gather group 

membership. After that, the ZyXEL Device periodically updates this information. IP 
multicasting can be enabled/disabled on the ZyXEL Device LAN and/or WAN interfaces in 
the web configurator (

LAN

;

 WAN

). Select 

None

 to disable IP multicasting on these 

interfaces.

8.2.4  Any IP

Traditionally, you must set the IP addresses and the subnet masks of a computer and the 
ZyXEL Device to be in the same subnet to allow the computer to access the Internet (through 
the ZyXEL Device). In cases where your computer is required to use a static IP address in 
another network, you may need to manually configure the network settings of the computer 
every time you want to access the Internet via the ZyXEL Device. 

With the Any IP feature and NAT enabled, the ZyXEL Device allows a computer to access the 
Internet without changing the network settings (such as IP address and subnet mask) of the 
computer, when the IP addresses of the computer and the ZyXEL Device are not in the same 
subnet.  Whether a computer is set to use a dynamic or static (fixed) IP address, you can 
simply connect the computer to the ZyXEL Device and access the Internet. 

The following figure depicts a scenario where a computer is set to use a static private IP 
address in the corporate environment. In a residential house where a ZyXEL Device is 
installed, you can still use the computer to access the Internet without changing the network 
settings, even when the IP addresses of the computer and the ZyXEL Device are not in the 
same subnet. 

Содержание P-2608HWL-D1




































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды