ZyXEL Communications MES3500-24, Руководство пользователя

Страница: 43 / 349

Chapter 4 The Web Configurator
MES3500-24/24F User’s Guide
43
AAA This link takes you to a screen where you can configure authentication,
authorization and accounting services via external servers. The external servers
can be either RADIUS (Remote Authentication Dial-In User Service) or
(Terminal Access Controller Access-Control System Plus).
IP Source Guard This link takes you to screens where you can configure filtering of unauthorized
DHCP and ARP packets in your network.
Loop Guard This link takes you to a screen where you can configure protection against
network loops that occur on the edge of your network.
VLAN Mapping This link takes you to screens where you can configure VLAN mapping settings on
the Switch.
Layer 2 Protocol
Tunneling This link takes you to a screen where you can configure L2PT (Layer 2 Protocol
Tunneling) settings on the Switch.
sFlow This link takes you to screens where you can configure sFlow settings on the
Switch.
PPPoE This link takes you to screens where you can configure how the Switch gives a
PPPoE termination server additional subscriber information that the server can
use to identify and authenticate a PPPoE client.
Errdisable This link takes you to a screen where you can configure CPU protection and error
disable recovery.
Private VLAN This link takes you to a screen where you can block traffic between ports in a
VLAN on the Switch.
IP Application
Static Routing This link takes you to a screen where you can configure static routes. A static
route defines how the Switch should forward traffic by configuring the TCP/IP
parameters manually.
DiffServ This link takes you to screens where you can enable DiffServ, configure marking
rules and set DSCP-to-IEEE802.1p mappings.
DHCP This link takes you to screens where you can configure the DHCP settings.
Management
Maintenance This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
Diagnostic This link takes you to screens where you can view system logs and can test
port(s).
Syslog This link takes you to screens where you can setup system logs and a system log
server.
Cluster
Management This link takes you to a screen where you can configure clustering management
and view its status.
MAC Table This link takes you to a screen where you can view the MAC address and VLAN ID
of a device attached to a port. You can also view what kind of MAC address it is.
ARP Table This link takes you to a screen where you can view the MAC address – IP address
resolution table.
Configure Clone This link takes you to a screen where you can copy attributes of one port to
(an)other port(s).
Table 4
Navigation Panel Links (continued)
LINK DESCRIPTION