ZyXEL Communications MES3500-24, Руководство пользователя

Страница: 206 / 349

Chapter 25 AAA
MES3500-24/24F User’s Guide
206
TCP Port The default port of a server for authentication is 49. You need not change this
value unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external server and the Switch. This key is not sent over the network. This key
must be the same on the external server and the Switch.
Delete Check this box if you want to remove an existing server entry from the Switch. This
entry is deleted when you click Apply.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Accounting
Server Use this section to configure your accounting settings.
Timeout Specify the amount of time in seconds that the Switch waits for an accounting request
response from the server.
Index This is a read-only number representing a accounting server entry.
IP Address Enter the IP address of an external accounting server in dotted decimal notation.
TCP Port The default port of a accounting server is 49. You need not change this value
unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external accounting server and the Switch. This key is not sent over the network.
This key must be the same on the external accounting server and the Switch.
Delete Check this box if you want to remove an existing accounting server entry from the
Switch. This entry is deleted when you click Apply.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 68
Advanced Application > AAA > Server Setup (continued)
LABEL DESCRIPTION