ZyXEL Communications MES3500-24, Руководство пользователя

Страница: 34 / 349

Chapter 3 Hardware Overview
MES3500-24/24F User’s Guide
34
3
Pull the transceiver out of the slot.
Figure 13
Removing the Fiber Optic Cables
Figure 14
Opening the Transceiver’s Latch Example
Figure 15
Transceiver Removal Example
3.1.4 Power Connector
Make sure you are using the correct power source as shown on the panel and that no objects
obstruct the airflow of the fans.
Use the following procedures to connect the Switch to a power source after you have installed it.
Note: Check the power supply requirements in Chapter 46 on page 333 , and make sure
you are using an appropriate power source.
Keep the power supply switch and the Switch’s power switch in the OFF
position until you come to the procedure for turning on the power.
Use only power wires of the required diameter for connecting the Switch to a power supply.
3.1.4.1 AC Power Connection
Connect the female end of the power cord to the power socket of your Switch. Connect the other
end of the cord to a power outlet.