ZyXEL Communications MAX-207HW2, Руководство пользователя

Страница: 65 / 180

Chapter 6 The WIFI Configuration Screen
User’s Guide
66
6.2.2 WEP Encryption
In order to configure and enable WEP encryption; click Advanced (
進階
) > WIFI
Configuration (WIFI
設定
) > General to display the General screen. Select
WEP (OPEN) or WEP (SHARED) from the Security Mode (
安全模式
) list.
Figure 21 Advanced (
進階
) > WIFI Configuration (WIFI
設定
) > General: WEP
(OPEN) / WEP (SHARED)
The following table describes the wireless LAN security labels in this screen.
6.2.3 WPA(2)-PSK
In order to configure and enable WPA(2)-PSK authentication; click Advanced (
進
階
) > WIFI Configuration (WIFI
設定
) to display the General screen. Select
Table 19 Advanced (
進階
) > WIFI Configuration (WIFI
設定
) > General: WEP
(OPEN) / WEP (SHARED)
LABEL DESCRIPTION
Security
Mode (
安全模
式
)
Choose WEP (OPEN) or WEP (SHARED) from the drop-down list box.
WEP Key The WEP key is used to encrypt data. Both the WiMAX Modem and the
wireless stations must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5 or 13 characters
(ASCII string) or 10 or 26 hexadecimal characters ("0-9", "A-F") for a 64-
bit or 128-bit WEP key respectively.