ZyXEL Communications MAX-207HW2 Скачать руководство пользователя страница 52

Страница: 52 / 180

Chapter 5 The LAN Configuration Screens

User’s Guide

5.6 Other Settings

Click ADVANCED > LAN Configuration > Other Settings to set the RIP and
Multicast options.

Figure 17

ADVANCED > LAN Configuration > Advanced

The following table describes the labels in this screen.

Apply

Click to save your changes.

Cancel

Click to return to the previous screen without saving your changes.

Table 15

Management > Static Route > IP Static Route > Edit (continued)

LABEL

DESCRIPTION

Table 16

ADVANCED > LAN Configuration > Other Settings

LABEL

DESCRIPTION

RIP & Multicast Setup
RIP Direction

Use this field to control how much routing information the WiMAX
Modem sends and receives on the subnet.

• None - The WiMAX Modem does not send or receive routing

information on the subnet.

• Both - The WiMAX Modem sends and receives routing information

on the subnet.

• In Only - The WiMAX Modem only receives routing information on

the subnet.

• Out Only - The WiMAX Modem only sends routing information on

the subnet.

RIP Version

Select which version of RIP the WiMAX Modem uses when it sends or
receives information on the subnet.

• RIP-1 - The WiMAX Modem uses RIPv1 to exchange routing

information.

• RIP-2B - The WiMAX Modem broadcasts RIPv2 to exchange routing

information.

• RIP-2M - The WiMAX Modem multicasts RIPv2 to exchange routing

information.

Содержание MAX-207HW2





















































































































































































Результаты поиска

Содержание MAX-207HW2

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications MAX-207HW2, Руководство пользователя

Результаты поиска

Содержание MAX-207HW2

Отзывы:

Бренды по названию

Популярные бренды