ZyXEL Communications LTE5366 Series, Руководство пользователя

Страница: 80 / 228

Chapter 7 Wireless LAN
LTE5366 Series User’s Guide
80
7.6 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Configuration > Network > Wireless LAN > Advanced . The screen appears as shown.
Figure 45 Configuration > Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 27 Configuration > Network > Wireless LAN > Advanced
LABEL DESCRIPTION
Advanced 2.4G Wireless Settings / Advanced 5G Wireless Settings
RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/ CTS
(Clear To Send) handshake.
This field is not configurable and the LTE5366 automatically changes to use the maximum
value if you select 802.11n, 802.11gn or 802.11bgn in the
Wireless LAN > General screen.
Fragmentation
Threshold The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent.
This field is not configurable and the LTE5366 automatically changes to use the maximum
value if you select
802.11n , 802.11gn or 802.11bgn in the Wireless LAN > General screen.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between
a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
clients can access the wired network and communicate with each other. When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot communicate with
each other.
Green AP Select Enable to reduce the power consumption by adjusting the output power. The LTE5366
reduces the output power of the transmitter from about 260mA to 188mA when there is no
IEEE 802.11 wireless clients associated with the LTE5366 wireless network.