![ZyXEL Communications LTE5366 Series Скачать руководство пользователя страница 149](http://html1.mh-extra.com/html/zyxel-communications/lte5366-series/lte5366-series_user-manual_946003149.webp)
Chapter 21 Bandwidth Management
LTE5366 Series User’s Guide
149
21.5.1 Add Bandwidth management Rule
If you want to create a new bandwidth management rule for a service or application, click the
Add
New Rule
icon in the
Advanced
screen. The following screen displays.
Figure 95
Bandwidth Management Rule Configuration: Application List
The following table describes the labels in this screen.
Modify
Click the remove icon to delete the rule.
Restart
Click this button to begin configuring this screen afresh.
Reset QoS Rule
Click this button to remove all bandwidth management rules.
Table 65 Management > Bandwidth Management > Advanced (continued)
LABEL
DESCRIPTION
Table 66 Bandwidth Management Rule Configuration: Application List
LABEL
DESCRIPTION
Rule
Select
Enable
to turn on the bandwidth management rule. Otherwise, select
Disable
.
IP Address
Enter the IP address or a range of IP addresses of the destination computer for whom this rule
applies.
Service
Select
Service Port
and manually enter the port number(s) that defines the traffic type, for
example TCP port 80 defines web traffic.
Select
Pre-defined Application profiles
to configure a bandwidth management rule for a
pre-defined service or application.
Protocol
If you set
Service
to
Service Port
, select the protocol (
TCP
, or
UDP
) used for the service.
Service Type
If you set
Service
to
Pre-defined Application profiles
, select the name of the service to which
the LTE5366 applies the bandwidth management rule.
Control
Select
Maximum Bandwidth
or
Minimum Bandwidth
and specify the maximum or minimum
bandwidth allowed for the rule in
KBps
(kilobytes per second) or
MBps
(megabytes per
second).
Otherwise, select
Priority
and enter a priority level (from 1 to 7) for traffic that matches this
rule.
Direction
Select
To LAN&WLAN
to apply the rule to traffic from WAN to LAN and WLAN.
Select
To
WAN
to apply the rule to traffic from LAN/WLAN to WAN.
Select
Both
to apply the rule to traffic traveling in either direction.
Содержание LTE5366 Series
