ZyXEL Communications LTE5366 Series, Руководство пользователя

Страница: 41 / 228

Chapter 4 Tutorials
LTE5366 Series User’s Guide
41
For example, you may set up three wireless networks ( A , B and C ) in your office. A is for workers, B is for
guests and C is specific to a VoIP device in the meeting room.
4.4.1 Configuring Security Settings of Multiple SSIDs
The LTE5366 is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your LTE5366 .
1
Connect your computer to the LAN port of the LTE5366 using an Ethernet cable.
2
The default IP address of the LTE5366is “192.168.1.1”. In this case, your computer must have an IP address
in the range between “192.168.1.2” and “192.168.1.254”.
3
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show
your computer’s IP address. If your computer’s IP address is not in the correct range then see Appendix
C on page 189 for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type
“http://192.168.1.1” as the web address in your web browser.
5
Enter “admin” as the user name and “1234” (default) as the password and click Login .
6
Type a new password and retype it to confirm, then click Apply . Otherwise, click Ignore .
7
Go to Configuration > Network > Wireless LAN > More AP . Click the Edit icon of the first entry to configure
wireless and security settings for SSID_Worker .
SSID SECURITY TYPE KEY
Zyxel_Worker WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNetwork
Zyxel_VoIP WPA-PSK VoIPOnly12345678
Zyxel_Guest WPA-PSK keyexample123