ZyXEL Communications LTE5366 Series, Руководство пользователя

Страница: 112 / 228

Chapter 14 Firewall
LTE5366 Series User’s Guide
112
Figure 74 Configuration > Security > Firewall > Services l
The following table describes the labels in this screen.
Table 49 Configuration > Security > Firewall > Services
LABEL DESCRIPTION
ICMP Internet Control Message Protocol is a message control and error-reporting protocol between
a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP) datagrams, but
the messages are processed by the TCP/IP software and directly apparent to the application
user.
Respond to Ping
on The LTE5366 will not respond to any incoming Ping requests when Disable is selected. Select
LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming WAN Ping
requests. Otherwise select LAN&WAN to reply to all incoming LAN and WAN Ping requests.
Apply Click Apply to save the settings.
WAN Stealth Mode
Enable WAN
Stealth Mode Select this check box to silently discard the matched packets without sending a TCP reset
packet or an ICMP destination-unreachable message to the sender.
Apply Click Apply to save the settings.
Enable Firewall Rule
Enable Firewall
Rule Select this check box to activate the firewall rules that you define (see Add Firewall Rule
below).
Apply Click Apply to save the settings.
Add Firewall Rule
Service Name Enter a name that identifies or describes the firewall rule.
MAC Address Enter the MAC address of the computer for which the firewall rule applies.