ZyXEL Communications LTE5366 Series, Руководство пользователя

Страница: 20 / 228

Chapter 1 Introduction
LTE5366 Series User’s Guide
20
1
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
2
Mark two holes on the wall at the appropriate distance apart for the screws.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
3
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the full
depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way in - leave
a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the screws all
the way in - leave a gap of about 0.5 cm.
4
Make sure the screws are fastened well enough to hold the weight of the LTE5366 with the connection
cables.
5
Align the holes on the back of the LTE5366 with the screws on the wall. Hang the LTE5366 on the screws.
Figure 5 Wall Mounting Example
M4 Screws Two
Screw anchors (optional) Two
Table 3 Wall Mounting Information