ZyXEL Communications IES-1248-51 Скачать руководство пользователя

Страница: 144 / 385

IES-1248-51 User’s Guide

144

Chapter 18 xDSL Line Data

18.3 xDSL Line Data Screen

This

screen displays an ADSL port’s line bit allocation.

ATUC/ATUR ES

The Number of Errored Seconds transmitted (downstream) or received

(upstream) on this ADSL port.

ATUC/ATUR SES

The Number of Severely Errored Seconds transmitted (downstream) or received

(upstream) on this ADSL port. Severely errored seconds contained 30% or more

errored blocks or at least one defect. This is a subset of the

Down/Up Stream

ATUC/ATUR UAS

The downstream or upstream number of UnAvailable Seconds.

Fast FEBE

In fast mode, the number of Far End Block Errors (Far End Cyclic Redundancy

Checks).

Fast NEBE

In fast mode, the number of Near End Block Errors (Near End Cyclic

Redundancy Checks).

Fast FEFEC

In fast mode, the Far End number of ADSL frames repaired by Forward Error

Correction.

Fast NEFEC

In fast mode, the Near End number of ADSL frames repaired by Forward Error

Correction.

Interleaved FEBE

In interleaved mode, the number of Far End Block Errors (Far End Cyclic

Redundancy Checks).

Interleaved NEBE

In interleaved mode, the number of Near End Block Errors (Near End Cyclic

Redundancy Checks).

Interleaved FEFEC

In interleaved mode, the Far End number of ADSL frames repaired by Forward

Error Correction.

Interleaved NEFEC

In interleaved mode, the Near End number of ADSL frames repaired by Forward

Error Correction.

LPR

This is the number of times that the subscriber’s ADSL device has experienced a

Loss of Power (been off).

15 min, 1day history This section of the screen displays line performance statistics for the current and

previous 15-minute periods, as well as for the current and previous 24 hours.

lofs

The number of Loss Of Frame Seconds that have occurred within the period.

loss

The number of Loss Of Signal Seconds that have occurred within the period.

lols

The number of Loss Of Link Seconds that have occurred within the period.

lprs

The number of Loss of Power Seconds that have occurred within the period.

The number of Errored Seconds that have occurred within the period.

init

The number of successful initializations that have occurred within the period.

ses

The number of Severely Errored Seconds that have occurred within the period.

uas

The number of UnAvailable Seconds that have occurred within the period.

Table 27

xDSL Performance (continued)

LABEL

DESCRIPTION

Содержание IES-1248-51


































































































































































































































































































































































































Результаты поиска

Содержание IES-1248-51

Отзывы:

Похожие инструкции для IES-1248-51

Бренды по названию

Популярные бренды

ZyXEL Communications IES-1248-51, Руководство пользователя

Результаты поиска

Содержание IES-1248-51

Отзывы:

Похожие инструкции для IES-1248-51

Бренды по названию

Популярные бренды