Chapter 8 Application
ENC User’s Guide
236
Channel
Select Auto and a channel set (1, 6, 11 or 1, 4, 7, 11 or 1, 5, 9, 13) if you want
the AP automatically switches a channel within the channel set when the original
channel has problems with wireless interference. Alternatively, select Manual and
a specific channel if you want to fix the channel.
Transmit Power
Set the output power this wireless AP profile uses. If there is a high density of APs
in an area, decrease the output power of the ENC to reduce interference with other
APs. Select one of the following 100%, 50% or 25%.
System Name
Select Use device’s display name as system name to configure an wireless
AP’s system name as its display name in the ENC when you apply this profile to the
device. Alternatively, select Customized and enter a name to configure the
device’s system name as the specified name.
Security
Select None to allow wireless stations to communicate with the access points
without any data encryption or authentication.
Select WPA to configure and enable WPA or WPA-PSK authentication and
encryption.
Select WPA2 to configure and enable WPA2 or WPA2-PSK authentication and
encryption.
Select WPA/WPA2 to have both WPA2 and WPA wireless clients be able to
communicate with the ENC even when the ENC is using WPA2 or WPA2-PSK.
Select WEP to configure and enable WEP encryption.
The following fields are available if you select WPA, WPA2, or WPA/WPA2 in the Security field.
Group Key
Update
Timer
Enter the rate at which the wireless AP or the RADIUS server sends a new group
key out to all clients.
Use WPA
with Pre-
shared Key
Select this option if you do not have a RADIUS server in your network and want to
use a pre-shared key WPA or WPA2.
Pre-shared
Key
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The
only difference between the two is that WPA(2)-PSK uses a simple common
password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
Use WPA
with
RADIUS
Server
Select this option if you have a RADIUS server in your network and want to use it
for user authentication and encryption.
Server IP
Enter the IP address of the external authentication server in dotted decimal
notation.
Authenticati
on Port
Enter the port number of the external authentication server. The default port
number is 1812.
You need not change this value unless your network administrator instructs you to
do so with additional information.
Shared
Secret Key
Enter a password (from 8 to 63 case-sensitive ASCII characters) as the key to be
shared between the external authentication server and the ENC.
The key must be the same on the external authentication server and your wireless
AP. The key is not sent over the network.
The following fields are available if you select WEP in the Security field.
Encryption
Select to use 64 Bit or 128 Bit WEP key(s) for excrypting wireless packets.
Mode
Select HEX to enter hexadecimal characters as a WEP key.
Select ASCII to enter ASCII characters as WEP key.
Table 112
AP Manager > AP Profile > Add/Edit (continued)
LABEL
DESCRIPTION
Содержание ENTERPRISE NETWORK CENTER
