ZyXEL Communications EMG6726-B10A Скачать руководство пользователя страница 247

Страница: 247 / 323

Chapter 27 Multicast Status

EMG6726/8726-B10A User’s Guide

247

Figure 161

System Monitor > Multicast Status > MLD Status

The following table describes the labels in this screen.

Table 115 System Monitor > Multicast Status > MLD Status

LABEL

DESCRIPTION

Refresh

Click this button to update the status on this screen.

Interface

This field displays the name of an interface on the EMG that belongs to an MLD multicast group.

Multicast Group

This field displays the name of the MLD multicast group to which the interface belongs.

Filter Mode

INCLUDE

means that only the IP addresses in the

Source List

get to receive the multicast group’s

traffic.

EXCLUDE

means that the IP addresses in the

Source List

are not allowed to receive the multicast

group’s traffic but other IP addresses can.

Source List

This is the list of IP addresses that are allowed or not allowed to receive the multicast group’s
traffic depending on the filter mode.

Member

This is the list of members in the multicast group.

Содержание EMG6726-B10A




































































































































































































































































































































Результаты поиска

Содержание EMG6726-B10A

Отзывы:

ZyXEL Communications EMG6726-B10A, Руководство пользователя, Страница: 247 / 323

Результаты поиска

Содержание EMG6726-B10A

Отзывы: