manualshive.com logo in svg

ZyXEL Communications EMG6726-B10A, Руководство пользователя, Страница: 194 / 323

Поделиться
Скачать
ZyXEL Communications EMG6726-B10A Скачать руководство пользователя страница 194

Chapter 18 MAC Filter

EMG6726/8726-B10A User’s Guide

194

The following table describes the labels in this screen. 

Table 79   Security > MAC Filter 

LABEL

DESCRIPTION

MAC Address Filter 

Select 

Enable

 to activate the MAC filter function.

MAC Restrict Mode

Select 

Allow

 to only permit the listed MAC addresses access to the EMG. Select 

Deny

 to 

permit anyone access to the EMG except the listed MAC addresses.

Set

This is the index number of the MAC address.

Active

Select

 Active

 to enable the MAC filter rule. The rule will not be applied if 

Active

 is not 

selected.

Host Name 

Enter the host name of the wireless or LAN clients that are allowed access to the EMG.

MAC Address

Enter the MAC addresses of the wireless or LAN clients that are allowed access to the EMG in 
these address fields. Enter the MAC addresses in a valid MAC address format, that is, six 
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

Apply

Click 

Apply

 to save your changes.

Cancel

Click 

Cancel

 to restore your previously saved settings.

Содержание EMG6726-B10A




































































































































































































































































































































Отзывы:

Нет отзывов