manualshive.com logo in svg

ZyXEL Communications EMG6726-B10A, Руководство пользователя, Страница: 22 / 323

Поделиться
Скачать
ZyXEL Communications EMG6726-B10A Скачать руководство пользователя страница 22

Chapter 1 Introducing the EMG

EMG6726/8726-B10A User’s Guide

22

LAN/WAN

Green

On

The EMG has a successful 10/100/1000 Mbps Ethernet connection on the 
WAN. 

Blinking 

The EMG is sending or receiving data to/from the WAN at 10/100/1000 
Mbps.

Off

There is no Ethernet connection on the WAN.

Ethernet 1~4

Green

On

The EMG has a successful 10/100/1000 Mbps Ethernet connection with a 
device on the Local Area Network (LAN). 

Blinking 

The EMG is sending or receiving data to/from the LAN at 10/100/1000 Mbps.

Off

The EMG does not have an Ethernet connection with the LAN.

USB

Note: The 

USB

 LED is reserved for future development.

WiFi 2.4G
WiFi 5G

Green

On

The 2.4 GHz or 5 GHz wireless network is activated.

Blinking

The EMG is communicating with 2.4 GHz or 5 GHz wireless clients.

Amber

Blinking

The EMG is setting up a WPS connection with a 2.4 GHz or 5 GHz wireless 
client.

Off

The 2.4 GHz or 5GHz wireless network is not activated.

WPS

Amber

On

WPS is enabled.

Off

WPS is disabled.

Table 3   EMG8726-B10A LED Descriptions 

LED

COLOR

STATUS

DESCRIPTION

Power

Green

On

The EMG is receiving power and ready for use.

Blinking

The EMG is self-testing.

Red

On

The EMG detected an error while self-testing, or there is a device 
malfunction.

Blinking

The EMG is uploading firmware.

Off

The EMG is not receiving power.

Internet

Green

On

The EMG has an IP connection but no traffic.

Your device has a WAN IP address (either static or assigned by a DHCP 
server), PPP negotiation was successfully completed (if used) and the DSL 
connection is up.

Blinking

The EMG is sending or receiving IP traffic.

Off

There is no Internet connection or the gateway is in bridged mode.

Red

On

The EMG attempted to make an IP connection but failed. Possible causes 
are no response from a DHCP server, no PPPoE response, PPPoE 
authentication failed.

WAN

Green

On

The EMG has a successful 10/100/1000 Mbps Ethernet connection on the 
WAN. 

Blinking 

The EMG is sending or receiving data to/from the WAN at 10/100/1000 
Mbps.

Off

There is no Ethernet connection on the WAN.

Ethernet

Green

On

The EMG has a successful 10/100/1000 Mbps Ethernet connection with a 
device on the Local Area Network (LAN). 

Blinking 

The EMG is sending or receiving data to/from the LAN at 10/100/1000 Mbps.

Off

The EMG does not have an Ethernet connection with the LAN.

Table 2   EMG6726-B10A LED Descriptions (continued)

LED

COLOR

STATUS

DESCRIPTION

Содержание EMG6726-B10A




































































































































































































































































































































Отзывы:

Нет отзывов