ZyXEL Communications ALC-1024L, Руководство пользователя

Страница: 31 / 105

Commands with MSC
Commands with MSC 2-1
Chapter 2
Commands with MSC
This chapter introduces the command line interface and lists all of the commands that are available when
you use the line card with the management switch card.
2.1 Command Line Interface with MSC Overview
You can use text command lines for software configuration. The rules of the commands are listed next.
1. The command keywords are in
courier new
font.
2. The command keywords must be entered exactly as shown, that is, no abbreviations are allowed.
3. The required fields in a command are enclosed in angle brackets
<>
, for instance, list port <port #> means
that you must specify the port number for this command.
4. The optional fields in a command are enclosed in square brackets
[]
, for instance, config [save]
means that the
save
field is optional.
5. “Command” refers to a command used in the command line interface (CI command).
6. The
|
symbol means “or”.
2.1.1 Saving Your Configuration with MSC
Always remember to save your configuration using the following syntax:
192.168.1.1> config save
Do not turn off your IES-2000 or IES-3000 or remove the line card while saving your configuration.
This command saves all system configurations to nonvolatile memory. You must use this command to save any
configuration changes that you make, otherwise the line card returns to its default settings when it is restarted. Save
your changes after each configuration session.
2.2 Command Shells
The management switch card provides two full sets of commands called shells. The standard shell commands
basically parallel the web configurator. The engineer shell commands are backwards compatible with the command
structure of earlier versions of the management switch card’s firmware. We recommend that you use the standard
shell commands for everyday management and that you use the engineer shell commands for advanced switch
diagnosis and troubleshooting.