Zünd S3 M-1200 страница 55 Скачать руководство пользователя

Страница: 55 / 214

Safety

3.13 Mechanical hazards

3.13.1 Collection, retraction

Caution:

Risk of injury from entanglement, getting caught and being pulled in!
The machine and the tool system has moving parts.

Possible consequences

• Bruises, crushing, lacerations to fingers or hands

• Bruising to the head and arms

• Pulling out of hair

• Damage to clothing

• Damage to machine

Precautions during initialization and operation in ONLINE mode:

• Do not touch modules and beams

• Do not reach into the working and moving area

• Do not touch the table plate or the material lying on it

• Do not place hands on side covers

• Do not lean with the torso on the work surface

• Avoid untied long hair and loose clothing and ties
These precautions specifically apply if the cutter can be switched into ONLINE operating mode by

the CAD/CAM system.

3.13.2 Hazards from foreign bodies

Caution:

Injury risk due to objects being ejected!
Foreign bodies on the table plate are collected by the beam or the module/tool/module carriage

and pushed away!

Possible consequences

• Facial injuries and others

• Damage to the machine

Precautionary measures during initialization and operation in ONLINE/OFFLINE mode:

• Do not place any materials, tools, or other objects on the table plate or the side covers.

• Before operation, check whether there are any objects on the table plate or the side covers.

Содержание S3 M-1200























































































































































































































Результаты поиска

Содержание S3 M-1200

Отзывы:

Похожие инструкции для S3 M-1200

Бренды по названию

Популярные бренды

Zünd S3 M-1200, Руководство по эксплуатации

Результаты поиска

Содержание S3 M-1200

Отзывы:

Похожие инструкции для S3 M-1200

Бренды по названию

Популярные бренды