Zultys BPS12, Руководство по оборудованию

Страница: 34 / 44

30
BPS12 Hardware Manual
2. Push the Standby switch to the I position. This will turn off the Alarm LED in the internal
power supply.
3. The system starts the boot up sequence; if the ambient temperature is 30° C or above, the fans
will begin spinning. A faultless boot up will conclude with the following sequence of LED
displays and alarms:
a. Status LED flashes green
b. Flashing red Power, Load, and Status LEDs, in that order
c. Flashing green Power, Load, and Status LEDs, in that order
d. Black (no light) Power, Load, and Status LEDs, in that order
e. Flashing green Power, Load, and Status LEDs, in that order
f. Black (no light) Power, Load, and Status LEDs, in that order
g. Flashing red Power, Load, and Status LEDs, in that order
h. Flashing green Power, Load, and Status LEDs, in that order
i. Black (no light) Power, Load, and Status LEDs, in that order
j. All LEDs turn green and stay green when the batteries are fully charged
If the system batteries are not fully charged, the Power LED will turn orange. The batteries
are fully charged before shipment by Zultys. However, the batteries will discharge during
storage and shipment. The system may require up to 24 hours to fully recharge. The Power
LED will turn green when charging is complete.
Danger
You must use only the power cord supplied by Zultys when connecting this system
to ac power. If this is not suitable, contact your Zultys sales or service
representative. The power cord that is provided has a separate ground (earth)
connector, and you must insert it into a power socket that is provided with a
protective ground (earth) contact. You must not negate this protective action by
using an extension cord (power cable) that does not carry the protective grounding
conductor. Using an unauthorized power cable will void your warranty.
Warning
The power supply cord is used as the main disconnect device. Ensure that the
power socket is located or installed near the equipment and is easily accessible.
Warning
Zur sicheren Trennung des Gerätes vom Netz ist der Netzstecker zu ziehen.
Vergewissern Sie sich, daß die Steckdose leicht zugänglich ist.
Warning
Le cordon d’alimentation est utilisé comme interrupteur général. La prise de
courant doit être située ou installée à proximité du matériel et être facile d’accés.