Zte ZXG10 iBSC, Руководство по установке оборудования

Страница: 17 / 169

Chapter 2 Installation Overview
3. The installation personnel shall be cautious of personal security, preventing from
accidents, such as electric shock or injuries.
4. The installation personnel shall wear insulated shoes on installation job.
5. The persons shall wear antistatic wrist strap on insertion or removal of the board.
In the dry environment, the electrostatic charges carried by human beings may
generate high voltage electrostatic. The operator carrying the electrostatic may
discharge it and cause damage to the devices when touching the components.
Wearing the anti-static wrist strap can discharge the static electricity in human body
and avoid device damage.
6. Don't directly look at fiber section or optical interface on installation and maintenance.
Serious eye injury may occur if laser bundle accesses into your eyeball.
7. Do not place the boards near any strong DC magnetic field or the cathode ray tube
of the monitor on the maintenance console but keep the boards at least 10 cm away
from them.
8. Do not plug a module with great force lest that the pins on the backplane be bent. Plug
the module right into the slot and avoid short circuit between parallel boards.
9. Hold the board at the edge against directly contacting board circuit, components, and
connectors. Hold and move carefully lest that your hand is injured.
10. Replacing the parts or modifying the equipment may give rise to extra danger.
Therefore, never replace any parts or modify the equipment by any means unless
otherwise authorized.
11. ZXG10 iBSC is an expensive electronic equipment, so you shall be careful on
installation.
To ensure your safety, please contact ZTE Corporation if you have any problem.
2-3
SJ-20110531095035-004|2011-10-28 (R2.0) ZTE Proprietary and Confidential