Zte ZXG10 iBSC, Руководство по установке оборудования

Страница: 112 / 169

ZXG10 iBSC Hardware Installation Guide
Figure 7-16 Cutting and Stripping Sheath of 1/2" Feeder
2. Cut the outer conductor of the feeder at the wave peak by using an electrician knife,
the cutting position is shown in Figure 7-17 , with 20 mm distance from the cut on the
outer sheath. You shall note that the cutting point shall be placed on the wave peak. If
you can not meet the position requirements about two cutting points, you shall re-cut
the feeder sheath to meet the two above requirements, in the unit of mm.
Figure 7-17 Cutting Position of Outer Conductor for 1/2" Feeder
The methods of cutting outer conductor is shown in Figure 7-18 .
7-14
SJ-20110531095035-004|2011-10-28 (R2.0) ZTE Proprietary and Confidential