Zte ZXC10 CBTS O1, Руководство по установке

Страница: 137 / 167

Confidential and Proprietary Information of ZTE CORPORATION
137
Figure 109 shows wooden box used for packing parts. Pack engineering
accessories in a universal external paper packing box and put them in a
wooden packing.
F
I G U R E
1 0 9 - W
O O D E N
P
A C K I N G
B
O X F O R
P
A R T S
Cabinet Packing Procedure
Follow procedure below to pack a cabinet:
1.
Blow away dirt from cabinet and clean it with ethyl alcohol.
2. Put dustproof caps onto DB9 socket and N-type socket at the set top,
SAA socket and DB25 socket at E1 cable set top, and 17W2 female
sockets at the HPA layer.
3. Lay cabinet onto the ground covered with a foam cushion, with cabinet
door upward. Lower hook of an electric crane to a proper location. Put
nylon rope on the hook around four hanging points. Hoist the hook to
lift cabinet.
4. Open aluminum foil compound film bag and put cabinet into the bag.
5. Put a cushion into a wooden packing box, push wooden packing box
until it is under the hoisted cabinet and put the cabinet slowly into the
wooden box.
6. Put desiccant bags into aluminum foil compound film bag. To wrap
cabinet tightly by aluminum foil compound film bag, extract air in the
bag with a cleaner. Seal the aluminum foil compound film bag.
7. Put cushions around cabinet and put cabinet into a wooden packing
box for cabinets, Figure 110 shows this process.