Zte ZXC10 CBTS O1, Руководство по установке

Страница: 111 / 167

Confidential and Proprietary Information of ZTE CORPORATION
111
2. Installing connector outer parts
Assemble all NJ-9 outer parts from left to right on cable. Figure 92
shows external conductor assembly.
F
I G U R E
9 2 - E
X T E R N A L
C
O N D U C T O R
A
S S E M B L Y
Stretch copper wires back at one end to metal washer. Figure 93
shows white shielded layer after stretching copper wires.
F
I G U R E
9 3 - S
H I E L D E D
L
A Y E R
Put sliver coated flange between shielded layer and insulation layer.
Finally adjust shielded layer between flange and metal washer. Figure
94 shows inserting external conductor flange.
F
I G U R E
9 4 - I
N S E R T I N G
E
X T E R N A L
C
O N D U C T O R
F
L A N G E