Zte ZXC10 CBTS O1, Руководство по установке

Страница: 90 / 167

ZXC10 CBTS I2 Installation Manual
90
Confidential and Proprietary Information of ZTE CORPORATION
4. Install the feeder window sealing washer and sealing cover together
while the feeder are indoors.
Feeder Connector Preparation
This section describes procedure to prepare ROSENBERGER 7/8" feeder
connectors:
1.
Take a feeder connector cutting tool.
Figure 68 shows a common cutting tool used for feeder connectors.
F
I G U R E
6 8 - C
U T T I N G
T
O O L F O R
M
A K I N G
7 / 8 " F
E E D E R
C
O N N E C T O R
2. Measure a straight feeder section of about 5.90 inch (150 mm) to be
installed with the connector. Cut and strip the feeder sheath at 50 mm
away from end.
3. Place feeder at the opening of cutter, keep a length of four
corrugations behind main blade, and turn cutter handle to close the
opening. The main blade should be right on the wave crest of a feeder
corrugation.
4. Turn the cutter in direction as marked till handles are completely
closed and internal and external copper conductors of feeder are cut
completely. Figure 69 shows that at the same time, auxiliary blade
cuts feeder external plastic protection sheath.
F
I G U R E
6 9 - C
U T T I N G
F
E E D E R W I T H A
C
U T T E R