Zte ZXC10 CBTS O1, Руководство по установке

Страница: 148 / 167

ZXC10 CBTS I2 Installation Manual
148
Confidential and Proprietary Information of ZTE CORPORATION
Frequency Range Selection
Take following steps to select a frequency range using SiteMaster:
1.
Press <ON
>
to turn on SiteMaster meter.
2. Press <FREQ
>
on the main menu.
3. Press <F1> on the [Frequency] menu.
4. Input [Lower
]
frequency, such as 825 MHz, and press <Enter
>
for
confirmation.
5. Press <F1> on the [Frequency] menu.
6. Input [Higher] frequency, such as 880 MHz, and press <Enter>for
confirmation.
7. After confirmation, press [Main] to return to the main menu.
SiteMaster Check
Check the SiteMaster for frequency, environment and feeder parameters
changes. Take following steps to check:
1.
Before check, ensure that input frequency range in SiteMaster is
correct.
2. Press <STARTCAL> to start check.
3. Press <Measuring OPEN>, <Measuring SHORT> and <Measuring
Load> as indicated to complete the check.
4. Include the extension cable attached with the meter to ensure
measurement accuracy.
Feeder Input Parameters
Take following steps to input feeder parameters:
1.
Press <DIST>
2. Press <MORE>
3. Press <LOSS> to enter input feeder loss (dB) per meter. Press
<Enter> for confirmation.
4. Press <PROP V> to enter relative transmission rate. Press <Enter> for
confirmation.
5. Press <Main> to return to the main menu.