Zoom 4530 Series, Руководство пользователя

Страница: 79 / 101

applications, select
Low
.
High
is the default value.
Enable
Click the
Enable
checkbox to apply the settings.
User Rule#
Select a rule from the dropdown menu to indicate when the policy applies.
(0)
Always
is the default value.
The SNMP Page
You can use the
S
imple
N
etwork
M
anagement
P
rotocol (
SNMP
) page to set up the
capability to remotely manage a computer network by polling and setting terminal
values and monitoring network events. Most users do not need to set up SNMP.
Enable SNMP
Click the
Local
,
Remote
, or both checkboxes to enable the SNMP function.
Check
Local
if you want the Modem/Router to respond to requests from the
LAN. Check
Remote
if you want the Modem/Router to respond to requests
from the WAN.
Get Community
Set
Get Community
to the
GetRequest
to which your device will respond.
Set Community
Set
Set Community
to the
SetRequest
that your device will accept.
IP 1, IP 2, IP 3, IP 4
Enter the IP address of your SNMP Management PCs. You must specify
where the Modem/Router should send
SNMP Trap
messages.
SNMP Version
Select the
SNMP Version
that your SNMP Management software supports.
WAN Access IP Address
Chapter 7: Using the Configuration Manager’s Advanced Program 79