Zontes ZT350-S 2022, Руководство по обслуживанию

Страница: 35 / 100

4
、
REAR WHELL COMPONENT 34
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1250104-006097 GB16674M6×12 (chromed/HH) 4
2 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5 ＋ φ14×1.5 5
3 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 5
4 1224300-108000 ZT350-VX rear mud board 1
5 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 1
Fig.12 Rear wheel, swinging
arm component
Rear mud board
PROCEDURE:
●
Rear mud board
Use 8# sleeve to remove bolt
⑴
on the upper right side, remove the bushing (2) and the cushion rubber (3).
Remove the bolt
⑸
on the lower right side with a 4# inner hexagon, and remove the bush
⑵
and the cushion
rubber
⑶
.
Using 8# sleeve remove the bolt (1) on the inside of the left inner side and remove the bushing (2) and the
cushion rubber (3).
Using 8# sleeve remove the bolt (1) at the rear left side and remove the bushing (2) and cushion rubber (3).
Hold the rear inner mud plate
⑷
, use an 8# sleeve to remove the bolt
⑴
on the upper middle of the left side,
and remove the bush
⑵
and the cushion rubber
⑶
.
CAUTION:
●
When heating and tearing the applique, be careful not to align the same part for a long time to prevent
damage to the inner mud board.
●
The muffler assembly and lower shroud assembly must be removed in advance.