Zontes ZT350-S 2022, Руководство по обслуживанию

Страница: 91 / 100

10
、
REAR COVER COMPONENT
90
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 6
2 1274300-111000 ZT350 － S rear tail skirt bracket 1
3 1250205-040095 GB70.1 inner hex bolt M8×16(color Zinc) 2
5 1240300-071000 Flanging bushing rubber (φ11×φ16×1) 2
6 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5 ＋ φ14×1.5 2
7 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 2
8 1246200-029007 ZT310T-M front left storage box front glue 1
9
1224100-010000 ZT250-S swell nail
6
10
1224300-102000 ZT350-S electrical device box
1
PROCEDURE:
●
Rear tail skirt assembly
Remove 2 bolts
⑴
fixing the rear tail skirt with 4 # hexagonal socket. If it is necessary to remove the rear tail
skirt bracket
⑵
, remove the two bolts
⑴
on the front part first.
Remove the bolt
⑶
at the bottom with 8 # sleeve, and remove the bushing
⑷
and buffer rubber
⑸
.
Pull out both sides of the rear tail skirt front part, and pull them out backwards for a certain distance at the
same time.
Unplug the 2 plugs at the front right side, pull the cable head at the front left part, and unplug the tail lamp
plug at the middle left part.
Carefully check again that all plugs have been unplugged, and then remove the rear tail skirt assembly from
the vehicle.
Remove the bolt
⑴
with the 4 # hexagon socket, and then remove the bushing
⑹
and buffer rubber
⑺
.
Remove 6 expansion nails
⑼
and rubber plugs
⑻
.
Take down the electrical part box
⑽
, and note that there are 5 clips connecting the electrical part box with
the tail lamp.
CAUTION:
●
Do not pull the cable directly when unplugging the plug.
4 1251700-058093
Flanging bushing φ8.2×φ11×4.5 ＋ φ16×
1.5(environmental color)
2
Fig.3 REAR COVER
COMPONENT
Tail skirt component 2