Zontes ZT350-S 2022, Руководство по обслуживанию

Страница: 11 / 100

1
、
FRAME COMPONENT 10
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1224200-008000 ZT310-R cable plastic staple 1
2 1224100-030000 Pin tie (Black 4.8×130) 1
3 1241200-044000 KD150-U fuel tank liner limit glue 2
4 1240300-007000 HJ125-6 Battery rubber gasket 1
5 1224300-122000 ZT350-S key insert assembly 1
6 1251100-328000 Hexagon socket head screw M6×14+8.5×3 SUS302 2
7 1244100-002000 ZT250-S Side cover round rubber 6
8 1250205-038000 GB70.2M5×12 (stainless steel) 2
9 1244300-048000 ZT350-V1 chain abrasive brick 1
10 1244100-061000 ZT250 anti-water rubber of frame 6
Fig.3 FRAME&ELECTRONIC PARTS
COMPONENT
Frame plastic parts
PROCEDURE:
●
Inner fuel tank ficx glue cushion
Hold the inner fuel tank limited glue cushion
⑶
and then push it out.
●
Side cover cushion
Remove the side cover cushion
⑺
with your hand directly.
●
Battery cushion
Put off the battery cushion
⑷
directly by hand.
●
Frame waterproof rubber plug
Remove the frame waterproof rubber plug
⑽
with your hand directly.
●
Wear block
Use a 3# hexagon socket to remove the 2 bolts
⑻
and then remove the wear block
⑼
●
Cable plastic staple
Use a pair of pliers to clamp in the direction of the arrow with a little force and then push thecable plastic
staple
⑴
out of the frame.
●
Key insert assembly
Use a 4# hexagon socket to remove the 2 bolts
⑹
and then take off the key insert assembly
⑸
.
CAUTION
：
●
It must be dismantled them first, such as the cushion, fuel tank cover, inner fuel tank, sider cover, tail dress
and so on.
●
All parts should be correctly assembled.
●
The plug strap
⑵
is a non-detachable structure and it is not recommended to cut it directly. It is difficult to
remove the broken portion of the buckle that is forcibly removed from the frame triangular reinforcing plate.