Zontes ZT350-S 2022, Руководство по обслуживанию

Страница: 92 / 100

10
、
REAR COVER COMPONENT
91
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-328000 Hexagon socket head screw M6×14+8.5×3 SUS302 4
2 1224300-100000 ZT350-S left cover 1
4 1251300-063093 Plywood M6×11×15(color Zinc) 4
5 1224300-101000 ZT350-S right side cover 1
6 1184300-005000 ZT350 antenna 1
7 1184200-053000 ZT310PKE external single antenna 1
PROCEDURE:
●
Left side cover
Remove the splint
⑷
on the tail skirt. Remove 2 bolts
⑴
with 4 # hexagonal socket, and remove self tapping
screw
⑶
with a cross screwdriver. Separate the left side cover from the left tail skirt,Pay attention to the snap
and plug at the arrow. Remove the plywood
⑷
from the left cover
⑵
.
●
Right side cover
Separate the right cover
⑸
from the right tail skirt according to the above steps.
●
Non inductive antenna
Remove two self tapping screws
⑶
with a cross screwdriver, and then remove the induction antenna
⑹
.
●
PKE antenna
The PKE antenna
⑺
is pasted with the double topping and the double topping on the rear cover.Heat it
slightly with a hot air gun, then tear off the double topping and clean up the residue.
CAUTION:
●
For the description of the non inductive antenna, see the PKE instructions in the user manual included with
the vehicle.
●
As the tail skirt is long and narrow in the middle, special attention shall be paid to protection during
placement or disassembly.
●
When reassembling, be careful to first set the self-tapping screws perpendicular to the mounting surface
and not to use excessive torque.
3 1251200-050094 Non-standard cross tapping screws ST3.9×12 (Black
Zinc)
4
Fig.4 REAR COVER
COMPONENT
Tail skirt component 3