Zontes ZT310-X, Руководство по обслуживанию

Страница: 105 / 119

12、REAR COVER COMPONENT 104
CHK
ADJ
NO. PART NO. PART NAME QTY REMARKS
1 1224100-010000 ZT250-S expansion nail 2
2 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 7
3 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5+φ14×1.5 7
4 1244100-052000 Cuff bushing cushioning rubber (φ8.5×φ14×1) 7
5 1251300-063093 Splint M6×11×15 (environmental color) 3
1224200-043000 ZT310-X tail skirt middle lithium battery
1224200-165000 ZT310-X tail skirt middle (colloid battery) colloid battery
7 1174200-008000 ZT310-X tail light 1
Fig.7 REAR COVER
COMPONENT
PROCEDURE
：
●
Back skirt assembly
Flip to the back of the rear skirt assembly and use a small Phillips screwdriver to expand the center of the nail
and remove the expansion pin
⑴
.
Flip down to the bottom, remove the 7 bolts
⑵
in sequence, and remove the bushing
⑶
and cushion rubber
⑷
.
The rear skirt assembly is split into left and right skirt assemblies, a middle assembly, and a taillight assembly.
Remove the splint
⑸
from the middle of the skirt
⑹
.
Remove the splint
⑸
from the taillight
⑺
.
CAUTION
：
●
The material should be protected during the disassembly process to prevent scratching of the lamp and paint
surface.
●
Do not pull the cable directly.
●
Pay attention to force and force direction when removing the buckle to prevent damage to the buckle.
ZT310-X tail skirt middle (colloid battery) ZT310-X tail skirt middle
Rear skirt assembly 2
6 1