Zontes ZT310-X, Руководство по обслуживанию

Страница: 66 / 119

8、FRONT FORK COMPONENT 65
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1224200-139000 ZT310-X1 windshield 1
2 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 6
3 1274100-057095 Bush φ6.2×φ8.4×3.5
＋
φ14×1.5 6
4 1244100-052000 Gum cushion, bush
（
φ8.5×φ14×1
）
6
5 1224200-132000 ZT310-X1 windshield upper left pressure block 1
6 1224200-133000 ZT310-X1 windshield upper right pressure block 1
7 1244200-080000 ZT310-X1 windshield lower pressure block pad 2
8 1264100-006000 ZT250-S pedal circlip 4
9 1274200-030000 Windshield lower pressing block rotating shaft 4
10 1274200-204000 ZT310-X1 windshield lower left clamp 1
11 1274200-205000 ZT310-X1 windshield lower right clamp 1
PROCEDURE:
●
Windshield assembly
Remove the two bolts
⑵
on the left side, and remove the two parts of the bushing
⑶
and the rubber pad
⑷
and
the left pressure block
⑸
on the windshield. Remove the right clamp
⑹
on the windshield as described above.
Hold the windshield
⑴
and remove the bolt
⑵
under the upper clamp, remove the bushing
⑶
and the rubber pad
⑷
and remove the windshield. .
Remove the clamp pad
⑺
.
●
Windshield press block assembly
Hold the lower left clamp
⑽
and use the tool to push the circlip
⑻
out, then remove the rotary shaft
⑼
. Remove
the lower left clamp
⑽
.
Remove the right clamp
⑾
as described above.
CAUTION
：
●
The windshield should be protected during the disassembly process to prevent scratches.
●
The circlip is small, keep it in good condition during the disassembly process, and prevent it from falling into
the vehicle interior.
Windshield assembly(TFT Instrument) 1
Fig.17 FRONT FORK
COMPONENT