EN
G
LIS
H
62
1.6 Analysis of exhaust muffler of 4-stroke engine
1.7 Analysis of gearshift
[1]Check whether cylinder,piston
and piston ring are worn.
[2]Check whether piston ring
has poor elasticity or is dead.
[3]Check whether the opening of
piston ring has 120
°
to another
opening.
Oil seal of valve is
damaged.
Check whether valve
and valve pipe are
worn.
Check whether the match
clearance of valve and
valve pipe is too big.
Start engine.When it runs with high
speed,remove oil ruler and check whether the
oil adding hole emits smoke.
The oil in crankcase is too much.The
redundant oil should be discharged and
let the oil level not exceed the upper
mark.
Check whether the oil level
of crankcase exceeds the
upper mark.
The exhaust muffler of 4-stroke engine emits
blue and white thick smoke.
No
Yes
Yes
No
No
Yes
Improve operation
method.
Check whether the gearshift axle is
distorted or whether gearshift arm is
distorted or worn.
C h e c k w h e t h e r c l u t h
disengages uncompletely.
Check whether operation of
gearshift is harmonious.
Readjust it.
Start engine and check whether the idle
speed of engine is too fast.
[1]Check whether the elasticity of cluth spring is well-
proportioned.
[2]Check whether drive or driven hub tooth of clutch is
worn to sawtooth.
[3]Check whether friction steel pieces of clutch are
distorted.
[4]Check whether the components of operation system
of clutch are worn.
Replace it
Gearshift of derailleur is
difficult.
[1]Check whether camshaf t of
gearshift or cam trough inside is
worn or damaged.
[2]Check whether the fork is worn.
[3]C h e c k w h e t h e r t h e f o r k i s
distorted.
[4]Check whether the fork axle is
distorted or worn.
No
Yes
Yes
No
No
Yes
Содержание ZS250GY-3
Страница 4: ...ENGLISH ...
Страница 75: ...ENGLISH 71 APPENDIX CIRCUIT DIAGRAM ...