ZOJE 20X, Руководство пользователя

Страница: 61 / 104

Operation and Debugging 20X Bar-tacking and Button Sewing Machine(LCD N)
49
2) Press key to change the function item for test and press key to enter the item for test. The
functions represented by each number are as follows:
3
）
During the function test, if user presses key or key, the test will be terminated and the
system will return to the status of step 2); however, if the aging mode has been used once, the aging mode can’t
be released unless the power supply is shut off.
2.3.1 System Input Test
1) This function is used to test the input status of panel
keys, pedal switch and various sensors. Select “01
System Input Test” and press
key to enter.
2) Under this mode, press key to change
test item and the status of the test signal is displayed
at the right side of the screen.
2.3.2 XY Origin Adjustment
This function is to display the inching operation, origin searching operation and the status of X/Y origin sensor
of X/Y motor.
Function Test Item Function Description
01 System Input Test Input signal test LED light as the indicator to show the status of
sensor input
02 XY Origin Adjustment XY motor/origin sensor test Display inching operation, origin searching
operation and the status of X/Y origin sensor
of X/Y motor
03 Aging Mode Continuous running Change to continuous running mode after
setting the conditions of continuous running
04 Main Shaft Test Main motor rotation number test Set up the rotation number, start machine and
display the actual rotation number.
06 Presser Foot Motor Test Presser foot, thread-trimming
motor/origin sensor test
Display inching operation of presser foot and
thread-trimming motor, origin searching
operation and the status of presser foot
origin/presser foot sensor.
08 System Output Test Output signal test Drive the movement of output solenoid/air
valve.
09 Panel Test LED and LCD test Test the status of panel displayer and LED
light.