ZOJE 20X, Руководство пользователя

Страница: 60 / 104

20X Bar-tacking and Button Sewing Machine(LCD N) Operation and Debugging
48
mode directly.
K DATA SETTING Key
This key is used to modify the pattern number or parameter value. Under trial
sewing mode, this key is used to move single needle and feed cloth.
L SELECTION Key This key is used to select among various pattern types, menu items or parameters.
M Sewing Speed Key
Under sewing editing mode (unready for sewing), press it to enter sewing speed
setting mode directly.
N EDIT Key
This key is used to display editing interface, select item or display detailed
information.
O RETURN Key This key is used to return to the previous interface.
P C Pattern Setting Key
Set and save C patterns, and press this button to start sewing the saved C pattern.
2.2
Installing the Main Shaft Motor
Assemble the main motor to the main shaft

through the
coupling

. And you need 4 screws to fix the coupling to
the upper shaft and the main shaft. Fix the coupling with
No.1 Screw

and make sure that it is vertical towards the
Flat Section, and then screw No.2 screw

.
Fix the
coupling to the main shaft motor with No.3 screw

, and
make sure it is vertical to the flat section of the main shaft
motor. Then screw the No.4 screw

to finish the
assembling task. The right diagram shows you the details:
This right diagram shows you the directions of external
cables of the main shaft motor (look from back, and the
line is on your left-hand side):

Screws for fixing the main shaft motor, totally 4;

Screws for fixing the back cover of the motor, totally 4;

main shaft motor encoder signal cable;

power line for
the main shaft motor.
2.3
Text Mode
This mode is activated to conduct maintenance operation.
1
）
When the sewing LED is off, hold pressing
key for 3 seconds, and you would hear the ring of the
buzzer. Then select item “11 system test” by pressing
key and press key to enter test
mode.