ZOJE 20X, Руководство пользователя

Страница: 98 / 104

20X Bar-tacking and Button Sewing Machine(LCD N) Appendix 1
86
Code Name Content Solution
and beyond normal range.
M-309
Pattern beyond
Sewing Range
When being computed, the pattern is
found to be beyond sewing range.
Press RESET key, confirm the size of the pattern is within
the set range of parameters K056, K057, K058 and K059.
M-310
Stitch Length
beyond Normal
Range
When being computed, the stitch
length is found to be beyond normal
range.
Press RESET key, confirm the pattern and X/Y scaling up
rate.
M-311
Pattern Data
Communication
Abnormal
Error occurs when the panel sends
pattern data to the main control.
Check the pattern and the cable connection between the
panel and the main control.
M-312
Normal Pattern
Lock Abnormal
The panel can’t read the normal
pattern lock data from EEPROM.
Press RESET key to enter the system menu and recover
the default setting.
M-313
Present Pattern
Parameter
Abnormal
The panel can’t read the pattern
parameter data from EEPROM.
Press RESET key to enter the system menu and recover
the default setting.
M-314
Parameter Setting
beyond Normal
Range
The set value of the parameter
exceeds normal range.
Press RESET key and change the set value.
M-315 Counter Abnormal
The panel can’t read the counter data
from EEPROM.
Press RESET key to enter the system menu and recover
the default setting.
M-316 Counter Exhausted
The counter has reached the upper
limit after the sewing.
Press RESET key.
M-317
Communication
Error between
Main Board and the
Panel
There is no communication or
communication error between main
board and the panel.
Turn off the power and repower the machine after a while.
Check the communication cable, the main board and the
panel.
M-318
The Storage Space
for External
Patterns Full
When patterns are imported to the
control panel via USB, the storage
space for such patterns is found full.
First export the internal patterns before deleting them, and
then import patterns again.
M-319
External Patterns
Format Abnormal
Pattern data is found abnormal when
its format data is read by the control
panel
Enter the parameter import/export mode of the system and
delete such patterns.
M-320
Imported Pattern
Already Exist
When importing pattern from USB
storage device, pattern with the same
number is found to exist already in
the panel.
Change the number of the pattern in the USB storage
device to be imported.
M-321
Imported Pattern
Not Found
When importing pattern from USB
storage device, the pattern to be
imported is not found.
Select existing patterns in the USB storage device.
M-322
Pattern Deletion
Error
When deleting external pattern, it is
found to be not exist.
Select existing pattern for deletion.