ZOJE 20X, Руководство пользователя

Страница: 7 / 104

Safety Matters for Attention 20X Bar-tacking and Button Sewing Machine(LCD N)
In case of thunder, lightning or storm, please turn off the power and pull plug out the socket.
Because these will have influence on the operation of sewing machine.
Installation
Please ask the trained technicians to install the sewing machine.
Don’t connect machine to power supply until the installation is finished.
Otherwise the action of sewing machine may cause personal injury once the start switch is pressed
at that situation by mistake.
When you tilt or erect the head of sewing machine, please use both of your hand in that operation.
And never press the sewing machine with strength.
If the sewing machine loses its balance, it will fall into floor thus causes the personal injury or
mechanical damage.
Grounding is a must.
If the grounding cable is not fixed, it may cause the electric-shock and mis-operation of machine
The entire cables shall be fixed with a distance at 25mm away from the moving component at least.
By the way, don’t excessively bend or tightly fixed the cable with nails or clamps, or it may cause
the fire or electric shock.
Please add security cover on the machine head.
Sewing
This sewing machine can only be used by the trained staff.
This sewing machine has no other usages but the sewing.
When operating the sewing machine, please remember to put on the glasses. Otherwise, the broken
needle will cause the personal injury in case the needle is broken.
At following circumstances, please cut off the power at once so as to avoid the personal injury
caused by the mis-operation of start switch:
1.Threading on needles; 2. Replacement of needles; 3. The sewing machine is left unused or beyond
supervision
At working, don’t touch or lean anything on the moving components, because both of the above
behaviors will cause the personal injury or the damage of the sewing machine.
During working, if the mis-operation happens or the abnormal noise or smell is found at the sewing
machine, user shall cut off the power at once, and then contact the trained technicians or the supplier
of that machine for solution.
For any trouble, please contact the trained technicians or the supplier of that machine.
Maintenance & Inspection
Only can the trained technicians perform the repair, maintenance and inspection of this sewing
machine.
For the repair, maintenance and inspection of the electrical component, please contact the
professionals at the manufacturer of control system in time.
At following circumstances, please cut off the power and pull off the plug at once so as to avoid the
personal injury caused by the mis-operation of start switch:.