Zodiac Z550iQ, Инструкция по установке и эксплуатации

Страница: 11 / 28

10
❷ Use
2.1 I Operating principle
The heat pump uses the calories (heat) in the air to heat up your pool's water. The process to heat your pool's water to
the temperature you want may take a few days as it depends on the weather conditions, the heat pump's power and the
difference between the water temperature and the temperature you want.
The heat pump is ideal for maintaining temperature.
The hotter and more humid the air, the better your heat pump will perform.
Tip: to improve the heating and maintaining of your pool's temperature
• Anticipate the commissioning of your pool far enough in advance before you use it.
• For the temperature rise, set the water circulation to continuous (24/24) in "Boost" mode.
• To maintain the temperature throughout the season, run "automatic" circulation for the equivalent of the
water temperature divided by two (the longer this time, the more sufficient the operating range of the
heat pump to heat the pool), in "SMART" or "ECOSILENCE" mode.
• Cover the pool with a sheet (bubble canopy, canvas, etc.) to prevent heat loss.
• Take advantage of a period with mild outdoor temperatures (on average > 10°C at night); it will be even
more effective if it runs during the warmest hours of the day.
• Keep the evaporator clean.
• Set the temperature you want and let the heat pump run.
• Connect the "Heating priority"; the filtration pump and heat pump operating time will be set according
to requirements.
2.2 I User interface presentation
2.2.1 Display screen and keyboard
Measured water temperature*
*Displays the temperature measured during the last operation of the heat pump.
Indic
at
or ligh
ts
Description Steady Flashing Off
Padlock Keypad locked / Keyboard unlocked
Water flow Water flow okay
Water flow too low or
missing
/
Mode
Indicates the selected
mode
/ /
Air temperature /
Air temperature
outside range of
operation.
Air temperature inside
range of operation
°F °C
Temperature unit
Selected temperature
unit
/ /
Wi-Fi Wi-Fi connected
Wi-Fi pairing in
progress
Wi-Fi not connected
Ke
ys
Function
"On/off" (press for 3 seconds) or back/exit
Menu selection and access
To browse and adjust the values
EN