background image

1

GENERAL WARNINGS

• 

Failure to respect the warnings may cause serious damage to the pool equipment 

or cause serious injury, even death.

• 

Only  a  person  qualified  in  the  technical  fields  concerned  (electricity, 

hydraulics or refrigeration) is authorised to carry out maintenance or 

repair work on the appliance. The qualified technician working on the 

appliance must use/wear personal protective equipment (such as safety 

goggles and protective gloves, etc.) in order to reduce the risk of injury 

occurring when working on the appliance.

• 

Before handling the appliance, check that it is switched off and isolated.

• 

The appliance is intended to be used for pools and spas for a specific purpose; it 

must not be used for any purpose other than that for which it was designed.

• 

This  appliance  is  not  intended  for  use  by  individuals  (including  children)  with 

impaired physical, sensorial or mental abilities, or persons lacking in knowledge 

and experience, unless they receive supervision or prior instructions on using the 

appliance from a person responsible for their safety.

• 

Children must be supervised to ensure that they do not play with the appliance.

• 

This appliance can be used by children over 8 and adults with impaired physical, 

sensory or mental capabilities, or who lack experience and knowledge, if they are 

correctly supervised or have been instructed in how to use the appliance safely and 

understand the hazards involved.

• 

This appliance should not be cleaned or maintained by children without supervision. 

• 

The appliance must be installed according to the manufacturer’s instructions and 

in compliance with local and national standards.

• 

The  installer  is  responsible  for  installing  the  appliance  and  for  compliance  with 

national installation regulations. Under no circumstances may the manufacturer 

be held liable in the event of failure to comply with applicable local installation 

standards.

• 

For any work other than the simple user maintenance described in this manual, the 

product should be referred to a qualified professional.

• 

If the appliance suffers a malfunction, do not try to repair it yourself; instead contact 

a qualified technician.

• 

Refer to the warranty conditions for details of the permitted water balance values 

for operating the appliance.

• 

Deactivating, eliminating or by-passing any of the safety mechanisms integrated 

into the appliance shall automatically void the warranty, in addition to the use of 

spare parts manufactured by unauthorised third-party manufacturers.

• 

Do not spray insecticide or any other chemical (inflammable or non-inflammable) 

in the direction of the appliance, as this may damage the body and cause a fire.

• 

Do not touch the fan or moving parts and do not place objects or your fingers in the 

 WARNINGS

Carefully read the instructions in this manual before using the unit.

• 

Before handling the appliance, it is vital that you read this installation and user 

manual, as well as the "Warranties" booklet delivered with the appliance. Failure 

to do so may result in material damage or serious or fatal injury and will void the 

warranty.

• 

Keep and pass on these documents for later viewing throughout the appliance's 

service life.

• 

The distribution or modification of this document in any way is prohibited, without 

prior authorisation from the manufacturer.

• 

The manufacturer is constantly developing its products to improve their quality. 

The information contained herein may therefore be modified without notice. 

Содержание Z550iQ





























Отзывы: