Zodiac Z550iQ, Инструкция по установке и эксплуатации

Страница: 16 / 28

15
2.4.4 Using and selecting the different active operating modes
In "Heating" mode, the heat pump has 3 active operating modes for adjusting its operating speed to the power that is
required and the mode that is selected.
Depending on the selected operating mode ( "BOOST" , "SMART" or "ECOSILENCE" ), the power delivered by the heat
pump can vary over a predefined range (depending on the speed of its compressor and fan).
The number of lit LEDs on the strip reflects the compressor's actual operating speed. This feature is particularly useful
in the "SMART" and "ECOSILENCE" modes to see if the machine is operating at its maximum over the predefined power
range or, on the contrary, at a reduced power level.
Active operating mode
BOOST SMART ECOSILENCE
Compr
essor oper
ating
speed*
HIGH
100%
or or or
MID
75%
LOW
50%
The LED strip goes up to "HIGH"
The LED strip fluctuates
between "LOW", "MID" and
"HIGH"
The LED strip fluctuates
between "LOW" and "MID"
Status Heating
Objective
Quickly increasing the setpoint
temperature
Intelligently controlling the
operating speed
Operating the most
economically and quietly
Automatically adapting the power to requirements
When to use When commissioning the pool
To maintain the temperature
To avoid having to intervene on
the appliance
To benefit from quiet operation
when little heating is required
* The compressor speed directly affects the appliance's power output.
To select the active operating mode:
• From the main screen (where the measured water temperature is displayed), press . The indicator stops in
front of one of the 3 operating modes ( "BOOST" , "SMART" or "ECOSILENCE" ).
• Press until reaching the desired mode. Once the indicator is placed in front of the desired operating mode,
it is confirmed automatically.